RBL

customer service 1-800-43-SATCO 140 See separate warranty for complete terms and conditions. Smart home gear: 86-103 in-wall dimmer Features • Works with incandescent and most dimmable fluorescent (CFL), or LED lighting • 7 LEDs to indicate ON/OFF/Dimming level status • Fits standard wall plate (not included) • Z-Wave Plus Certified • GROUP/ALL enabled, if supported by controller • Multiple scene control using double and triple tap • Provides instant manual status change to controller • Supports Central Scene command class • Over-The-Air firmware upgrade available, if supported by controller • Supports Network Wide Inclusion (inclusion through a repeater), if supported by controller • Powered by Sigma Design 500 Series module inside • Functions as a Z-Wave signal repeater • Supports screw and wire terminals General Parameter Operating Temperature 32° F to 104° F Storage Temperature -4° F to 140° F Storage Humidity 80% Electrical Ratings Input Voltage 120 VAC RMS Input Frequency 60Hz MaximumOutput Load Incandescent (600W, single gang), Dimmable CFL/LED (150W) Wire Terminals Requires neutral Fuse 10A Z-Wave Frequency for USA and Canada 908.4Mhz at 40kps, 916Mhz at 100kps Wireless Range (controller & repeater) 130 ft. at open air, 1 meter high, LOS Modulation FSK/GFSK Tx Power from IC setting 2 dbm Rx Sensitivity at 40 kps -99 dbm Rx Sensitivity at 100 kps -91.8 dbm Standby Current 25mA Mechanical Parameters Dimensions Body:2.8"x1.71"x1.41" Yoke: 4.13"x2.13"x.076" Wire Terminals Line, Load, Ground, Traveler, Neutral Minimum Hole for Wire Accepts #12 AWG (0.081" dia) Doesn't Accept #8 AWG (0.1285"dia) Wire Type Copper or plated aluminum Clamp Parts Copper only Wire Binding Screws UL 486a/b: Minimum Dia=#6(.138) Max Threads/inch = 36 Color Munsell N9 Apple White Material PC, Type 6485 Supplied Parts Description Quantity 86-103 In-Wall Dimmer 1 Mounting Screws 2 Instruction Manual 1 Product sheet SA2073