RBL

137 SMART HOME www.satco.com See separate warranty for complete terms and conditions. Smart home gear: 86-100 plug-in appliance module Features • Turns ON/OFF incandescent, CFL, or LED lamps, and AC operated electrical appliances • LED back-lit Key for manual ON/OFF and status indicator • Z-Wave Plus Certified • Controls appliances up to 15A • Functions as Z-Wave signal repeater • Grounded 3-pin AC power receptacle to enhance safety • Compact design - does not block the 2nd AC outlet • Over-The-Air firmware upgrade available, if supported by controller • Supports Network Wide Inclusion (inclusion through a repeater), if supported by controller • Powered by Sigma Design 500 Series module inside General Parameter Operating Temperature 32° F to 104° F Storage Temperature -4° F to 140° F Storage Humidity 80% Electrical Ratings Input Voltage 120 VAC RMS Input Frequency 60Hz MaximumOutput Load 900W incandescent, 200WCFL/LED, ½ horsepower motor and 15A, 1800W resistive load Fuse 0.5A Z-Wave Frequency for USA and Canada 908.4Mhz at 40kps, 916Mhz at 100kps Wireless Range (controller & repeater) 130 ft. at open air, 1 meter high, LOS Modulation FSK/GFSK Tx Power from IC setting 2 dbm Rx Sensitivity at 40 kps -99 dbm Rx Sensitivity at 100 kps -91.8 dbm Mechanical Parameters Dimensions Body: L3.27" X W2.13" X H1.5" With plug: L3.27" X W2.13" X H2.32" Color Munsell N9 Apple White Material PC, Type 6485 Supplied Parts Description Quantity 86-100 Plug-In Appliance Module 1 Instruction Manual 1 Product sheet SA2070